GRIPONE ISIDE 2 is the last generation of motorcycle traction control systems designed and produced by GUBELLINI. It is a extremely fast traction control and reliable anti wheelie control. The installation is extremely easy because the system is completely Plug & Play. You don’t need brackets or cut wires, just plug in and go.

WHAT IS GRIPONE ISIDE 2
GRIPONE ISIDE 2 was born from the union of our previous products (GRIPONE S3, GRIPONE S4 and GRIPONE LEONE), bringing together the best of each but not only. Before the “GRIPONE ISIDE” era, the choice between our three products was not clear and sometimes difficult. For this reason we have thought of a product that in addition to being avant-garde, could also respond to the needs of our customers in a clear way. Today the choice is simple because in a single product you can have all the characteristics of the three previous products. All at a lower price.

GRIPONE ISIDE 2 is the last generation of traction control systems for motorcycles. It includes the functions of traction control (to keep under control the spinning of rear tire) and anti wheelie control (to keep the front wheel just few centimeters off the ground). With the optional gear shift sensor kit, GRIPONE ISIDE 2 is able to work as quickshifter. The great innovation inside GRIPONE ISIDE is that it can work with or without speed sensors. It is the only one on the market that uses a sophisticated inertial platform in combination with the RPM signal. This characteristic lets GRIPONE ISIDE be incredibly easy to install and fast in reacting to the rear tire spinning. It does not need any computer to be programmed, it is “ready to go”.

TRACTION CONTROL. When we say that GRIPONE ISIDE can work with or without speed sensors on the wheels, it means that GRIPONE ISIDE base kit does not include the speed sensor. At this stage, the traction control works using a sophisticated algorithm that evaluate the tire load, the lean angle (by the inertial platform) and the RPM rate of change. When these three parameters do not match the correct range, GRIPONE reduce the power to avoid the sliding of rear tire.

As soon you plug the optional speed sensors kit, GRIPONE ISIDE is able to detect the wheel speeds and automatically it start to function using a second set of strategies to control the rear sliding. At this stage GRIPONE is more powerful and more accurate then any other system, because it combine both strategies applying the proper power reduction.

ANTI WHEELIE CONTROL. As well, the anti wheelie control use two different set of strategy. Without speed sensors, GRIPONE ISIDE evaluates the pitch angle and the pitch rate by the inertial platform. As soon the pitch angle is bigger then a certain value, GRIPONE reduce the power.

When you include the optional speed sensors in your GRIPONE system, the anti wheelie apply the second strategy estimating the front and rear speed and their accelerations. One more time at this stage GRIPONE combine both strategies to evaluate the proper power reduction.

QUICK SHIFTER
With the (optional) GEAR SHIFT SENSOR KIT, GRIPONE ISIDE can work as quickshifter. It means with only one device you can have on the bike a reliable traction control, an anti wheelie control and a quick shifter to improve the acceleration.

ECU: Length 60mm x Width 80mm x Height 29 mm

Included in the base kit:

• ECU
  
• Plug & Play wiring harness
• USB cable
• Inertial platform (Internal to the ECU)
• Remote LED
• Handlebar buttons and bracket
• User manual